PCP-D65-24U
Output: +24V at 2.5A, +5V at 1.0A
- Universal AC input
- High efficiency
- Low ripple & noise
- Low profile
- Over voltage protection
- Short circuit protection
- High MTBF
- LEVEL B EMI filter conduction
- 100% Burn-in and Hi-Pot test
|
| Electrical Features |
| INPUT |
| Input range |
90VAC~264VAC |
| Input frequency |
47Hz~63Hz |
| Input current |
< 1.5A at 115VAC |
| Inrush current |
< 30A at 115VAC
<60A at 230VAC |
| OUTPUT |
| Line regulation |
< 1% |
| Load regulation |
< +-5% for each output |
| Efficiency |
> 70% typical at full load |
| Hold up time |
16mS at 115VAC nominal load |
| Short circuit protection |
Pulsing mode, auto recovery |
| Over voltage protection |
10~25% above nominal output |
| Ripple / noise |
< 1% |
| Environmental |
| Operation temp. |
0°C ~ 50°C |
| Operation RH |
20% ~ 80% |
| Storage temp. |
-20°C ~ 80°C |
| Altitude |
0 ~ 7000 ft. |
| MTBF |
35,000 hrs. at rate load and 25°C ambient |
| Cooling method |
Free air convection |
| Safety Appd |
| UL, CUL |
UL 1950 3RD ED. |
| TUV |
EN 60950:1992+A1+A2+A3+A4 |
| CE |
EN 55022, IEC 801-2, IEC 801-3, and IEC 801-4 |
| EMI |
| CISPR 22 |
CLASS B |
| FCC |
CLASS B |
| Dielectric Withstand |
| Primary to Frame Ground |
3000VAC 10mA 1 sec |
| Primary to Secondary |
3000VAC 10mA 1 sec |
| Transformer Primary to Secondary |
3750VAC 10mA 1 sec |
| Primary to Secondary insulation resistance |
50M ohm min. apply 500VDC bias voltage |
| Primary to Frame Ground insulation resistance |
50M ohm min. apply 500VDC bias voltage |
| Leakage current |
3.5mA max. |
| Pin Assignments |
| Con1-1 |
Neutral |
| Con1-2 |
Line |
| Con2-1 |
N/a |
| Con2-2 |
+24V |
| Con2-3 |
Common |
| Con2-4 |
Common |
| Con2-5 |
+5V |
| Con2-6 |
+5V |
|
|
